Published By TeckWrap Craft On November 25, 2024
How To Use Glow In The Dark HTV?
Do you want to create magical designs for your shirt that light up when it's dark around? The amazing Glow in the Dark Heat Transfer Vinyl makes this possible. You can use this HTV by cutting it into the design of your choice and applying the recommended amount of heat and pressure for a specific time to transfer it. Read on to find out how to apply this fascinating vinyl to the compatible fabric.
Method For Using Glow In The Dark HTV
Glow in the Dark Iron-on Vinyl can be applied on fabrics that are cotton, polyester, or cotton blends. You can use it easily by following this step-by-step guide to create amazing designs that mesmerize all with their superb and steady glow.
Step 1: Get The Tools Needed
For a successful project you will need the following tools:
- Premium–quality Glow in the Dark HTV Vinyl.
- Automated cutting machine.
- Cutting mat.
- Heat press machine.
- Weeding tool.
- Parchment paper or Teflon sheet.
- Fabric or garment blank on which the design is being transferred.
Step 2: Work On Your Design
You will have to work on your design using the software used by your cutting machine. Cricut uses Design Space and if you have Silhouette, you will work on Silhouette Studio. Set the dimensions of your pattern or lettering according to the space on your fabric. Select the material and do not forget to mirror your design.
Step 3: Cut And Weed The Design
Cut a piece of Glow in the Dark HTV and place it on the cutting mat with the shiny side down. The dull, adhesive side should face up. Load the mat into the machine and allow it to cut the design. After it's done, remove negative vinyl pieces from your pattern using a tweezer, weeder, or a weeding pen.
Step 4: Prepare The Fabric
Wash the fabric to remove dirt and grime if any. This will also prevent it from shrinking later on if it is cotton. Allow it to dry then press it to remove creases and any remaining moisture.
Step 5: Adjust The Glow In The Dark Vinyl Heat Press Settings
Having the right heat press settings is very important for the perfect transfer of the design. You will have to preheat your machine. The heat settings for Glow in the Dark Iron-on Vinyl can range from 275°F to 300°F (135°C to 150°C) depending on your fabric. Use medium to firm pressure and apply heat for 10 to 15 seconds.
Step 6: Apply the Design To The Fabric
Place the design where you want it on your fabric. This time, the shiny side will face up. You will put the dull adhesive side down on the fabric. Cover it with parchment paper or Teflon sheet, whichever you have, and apply heat according to the settings mentioned above. When the time is up, slowly remove the carrier sheet from the vinyl. Your beautiful Glow in the Dark HTV design is ready to flaunt.
Glow In The Dark HTV Cut Settings
How to cut Glow in the Dark Vinyl? This is an important question to answer to design accurately and make weeding out extra pieces easy. Firstly, use a sharp, fine-point blade. A test cut is highly recommended for perfection. Follow the settings mentioned below:
| Cricut Explore Air 2 | Material: Vinyl Pressure: 220 |
|---|---|
| Cricut Maker | Material: Pressure: 180-185 |
| Cricut Maker 3 | Material: Permanent Glossy Pressure: 120-130 |
| Silhouette Cameo 4 | Blade: 3 Speed: 4 Pressure: 15 |
Glow In The Dark Vinyl Colors
Glow in the Dark HTV is available in many different colors such as white, yellow, light green, Tiffany, and more. You also get amazing neon shades in this vinyl that will add an electrifying effect to your crafts. Hence this luminous heat transfer vinyl presents a vibrant look in the light as well. You can also get different finishes in it like Glow in the Dark Glitter Vinyl which shimmers brilliantly. And if you want your design to have a 3D look, you can buy the Glow in the Dark Puff Heat Transfer Vinyl.
Glow In The Dark HTV Near Me
For those who want to design their apparel or soft decor with high-quality Glow in the Dark Vinyl, the best thing to do is to buy it online from a reliable vendor such as TeckWrap Craft. We ship our products to more than 60 countries globally. You can get it nearby from our website and it is also available at Amazon. We have a wide network and we are sure it must be available at your local craft store as well. We sell the best Glow in the Dark Vinyl but don’t take our word for it. Read reviews of our many satisfied customers and discover why they love it.
Frequently Asked Questions
Let’s Design With The Best Glow In The Dark Vinyl
Get your tools ready, it’s time to use this amazing luminescent heat transfer vinyl that will make your special occasions, themed parties, or holiday get-togethers more exciting and unforgettable. For the best quality Glow in the Dark HTV, visit Teckwrap Craft. We would love to hear from you!
